Laboratory Heat Resistant Fireproof Explosion Proof Acid & Alkali Resistant Chemical Fume Hood

• Customization: Available
• Material: Stainless Steel
• Type: Slit Type
• Model NO.: WJ-1800B
• Function: Exhaust, Velocity Control
• Feature: Corrosion Resistance, Heat Resistant, Acid & Alkali Resistant, Fireproof, Explosion Proof
• Hood Type: Standard
• Color: Grey
• Customized: Customized
• Condition: New
• Product Name: Chemical Fume Hood
• Work Surface: Ceramic
• Interior Baffle: Ceramic/Ceramic Fiber
• Airflow: Ceramic Fiber
• Liner Material: Ceramic Fiber
• Sash: Tempered Glass/Laminated Glass
• Cabinet: Multi-Layer Solid Wood
• Application: Environment/Institute/Biology Lab/Chemical Lab
• Transport Package: Standard Export Wooden Case Packing
• Specification: 1800*1205*2400 MM
• Trademark: Ample
• Origin: Chengdu, China
• HS Code: 8414809090
• Production Capacity: 200 Set/Month
• Package Size: 1900.00cm * 900.00cm * 2100.00cm
• Package Gross Weight: 500.000kg

Product Description

Product Description

A fume hood (sometimes called a fume cupboard or fume closet) is a type of local ventilation device that is designed to limit exposure to hazardous or toxic fumes, vapors or dusts.

A fume hood is typically a large piece of equipment enclosing five sides of a work area, the bottom of which is most commonly located at a standing work height.

Two main types exist, ducted and recirculating (ductless). The principle is the same for both types: air is drawn in from the front (open) side of the cabinet, and either expelled outside the building or made safe through filtration and fed back into the room. This is used to:

-protect the user from inhaling toxic gases (fume hoods, biosafety cabinets, glove boxes)
-protect the product or experiment (biosafety cabinets, glove boxes)
-protect the environment (recirculating fume hoods, certain biosafety cabinets, and any other type when fitted with appropriate filters in the exhaust airstream)

Secondary functions of these devices may include explosion protection, spill containment, and other functions necessary to the work being done within the device.

Product Parameters

  

Model Parameters	YT-1500A	YT-1500B	YT-1500C	YT-1800A	YT-1800B	YT-1800C
Size (mm)	1500(W)*865(D)*2400(H)			1800(W)*1205(D)*2400(H)
Worktop Size (mm)	1260(W1)*795(D1)*1100(H1)			1560(W1)*795(D1)*1100(H1)
Worktop	20+6mm Ceramic	20+6mm Ceramic	12.7mm Solid Physiochemical Board	20+6mm Ceramic	20+6mm Ceramic	12.7mm Solid Physiochemical Board
Liner	5mm Ceramic Fibre	5mm Compact Laminate	5mm Compact Laminate	5mm Ceramic Fibre	5mm Compact Laminate	5mm Compact Laminate
Diversion Structure	Back Absorption
Control System	Touch-Tone Control Panel (LED Screen)
Input Power	220V/32A
Fan Power	Less than 2.8 A
Socket Max. Load	5KW
Faucet	1 Set
Drainage Mode	Natural Fall
Storage	Double-Lock, Corrosion-Resistant, Damp-proof, Multi-layer Solid Wood with Mobile Wheel
Application	Indoor No-blast, 0-40 ºC
Application Field	Organic Chemical Experiment
Face Velocity Control	Manual Control
Average Face Velocity	0.3-0.5 m/s  Exhaust: 720-1200m³/h			0.3-0.5 m/s  Exhaust:900- 1490m³/h
Face Velocity Deviation	Less than 10%
Average Illumination	Less than 500  Lux
Noise	Within 55 dB
Exhaust Air	No Residue
Safety Test	In Accord with International Standard
Resistance	Less than 70Pa
Add Air Function	Distinctive Structure (Need Exclusive Add Air System)
Air Flow Control Valve	Dia. 250mm Flange Type Anti-Corrosion Control Valve			Dia. 315mm Flange Type Anti-Corrosion Control Valve

More About the Fume Hood

Close the Sash for Safety

The sash on a fume hood serves many purposes, but the most important one is to protect persons working in the laboratory. When the sash is closed it prevents any "leakage" of chemical fumes from the hood.

A  closed sash also protects you from "escapes" caused by accidents. Shattered glass, chemical spills, and vapors are contained in the hood if the sash is closed and an "event" occurs.

Closing the sash improves overall hood performance for other hoods in the lab and within the building. Also, in case of a power  outage or hood ventilation failure, chemical vapors will not back up into the laboratory. Closing the Sash for Safety is a very healthy habit to develop

Detailed Photos

            

 

Fume Hood Maintenance

• Hoods should be evaluated by the user before each use to ensure adequate face velocities and the absence of excessive turbulence.

• In case of exhaust system failure while using a hood, shut off all services and accessories and lower the sash completely. Leave the area immediately.

• Fume  hoods should  be certified, at  least annually, to ensure they are operating safely. Typical tests include face velocity measurements, smoke tests and tracer gas containment. Tracer gas containment tests are especially crucial, as studies  have shown that face velocity is not a good predictor of fume hood leakage.

• Laboratory fume hoods are one of the most important used and abused hazard control devices. We should understand that the combined use of safety glasses, protective gloves, laboratory smocks, good safety practices, and laboratory fume hoods are very important elements in protecting us from a potentially hazardous exposure.

• Laboratory fume hoods only protect users when they are used properly and are working correctly. A fume hood is designed to protect the user and room occupants from  exposure to vapors,  aerosols, toxic  materials,  odorous,  and  other  harmful substances. A secondary purpose is to serve as a protective shield when working with potentially explosive or highly reactive materials. This is accomplished by lowering the hood sash.

FAQ

What will you be doing inside the hood?

Try to document as much as you can about the application. What chemicals are used, and how are they used? Is heat involved? What volumes of chemicals will be used at a given time? Most importantly, know the answers to the following questions:

-Do you use Perchloric Acid?
-Do you use Hydrofluoric Acid (HF)?
-Are you working with Radioisotopes and require the use of lead bricks?

What size of fume hood do you need?

This is a four-part question:

   I. How wide do you want the fume hood to be? Ample offers fume hoods from 30 inches wide to 16 feet wide, with many options in between.

   II. Will there be equipment enclosed in the hood? If the answer is yes, then you must answer parts III and IV.

   III. What are the dimensions of the equipment? This information is essential to determining how deep the hood needs to be to house your equipment.

   IV. Do you need a bench-top or floor mounted hood? Applications that use extra-large equipment, such as 50-gallon drums, or applications that require equipment to be wheeled into the hood via a cart would require a floor mounted hood.

Do you need a built-in blower or a remotely located blower?

Built-in blowers are easier to install (and therefore less expensive), but they can be noisy and they put the ductwork under positive pressure, so they should be reserved for non-hazardous applications, short duct runs and instances where a remote blower cannot be installed (such as a mobile lab).

Remote blowers, though more complex to install, can be sized for the specific situation and keep the ductwork under negative pressure for safer operation.