| Usage: | Hospital, School, Research Institute, Inspection and Quarantine Department, Company, Food, Environment |
|---|---|
| Color: | Blue, White, Black, Silver |
| Feature: | Easy Cleaning, Corrosion Resistance, Abrasion Resistant |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier Emergency eye wash equipment is used to drench or flush the eyes with water when dust, irritants, or chemicals enter the eye. The term is sometimes written as one word, eyewash. These devices are sometimes referred to as "eye wash fountains".
Emergency eye-wash and shower equipment rinses contaminants from the eyes and body to help prevent injuries or permanent damage. Emergency eye washes and showers are used in labs, chemical plants, paper mills, and other environments with potentially harmful chemicals or materials. They're often required to meet government regulations and safety standards. Combination eye-wash stations are all-in-one eye wash and shower units.
Emergency showers and eyewash stations provide on-the-spot decontamination. They allow workers to flush away hazardous substances that can cause injury.
Accidental chemical exposures can still occur even with good engineering controls and safety precautions. As a result, it is essential to look beyond the use of goggles, face shields, and procedures for using personal protective equipment. Emergency showers and eyewash stations are a necessary backup to minimize the effects of accident exposure to chemicals.
Emergency showers can also be used effectively in extinguishing clothing fires or for flushing contaminants off clothing.
Emergency showers are designed to flush the user's head and body. They should not be used to flush the user's eyes because the high rate or pressure of water flow could damage the eyes in some instances. Eyewash stations are designed to flush the eye and face area only. There are combination units available that contain both features: a shower and an eyewash.
The need for emergency showers or eyewash stations is based on the properties of the chemicals that workers use and the tasks that they do in the workplace. A job hazard analysis can provide an evaluation of the potential hazards of the job and the work areas. The selection of protection -- emergency shower, eyewash or both -- should match the hazard.
| Product Name | Emergency Shower & Double Outlet Eye wash |
| Model | KC4R/KC4G/KC4Y/KC4X |
| Brand | AMPLE |
| Origin | Zhejiang, China(Mainland) |
| Color | Red, Green,Yellow, Staineless Steel |
| Body | 304 Staineless Steel or Solid Brass |
| Manufactured Standard | CE-DIN12899-UNI19608 |
| Product Feature |
Someone can immediately clear off when he is hurt by acid, causticity, industry, solvent or corrosive product accidentally. |
| Product Surface | Acidproof and endure cauterization. Adopt Stainless steel pipe and all connects are made in copper, which can prevent rust inside. |
| Shower nozzle | φ70 soft rubber protecting cup tp avoid second hurt resulted by colliding eyes when use it urgently. Protecting cup is dust-proof and can be pulled by water it use. Meanwhile it can reduce the water pressure to avoid hurting eyes.There is connection between protecting cup and dust-proof tray to avoid falling off. |
| Executes Standard | Require to use G1 pipe to connect drink water pipe. Min. water pressure: 4 bar Water Flow: Single outlet eye wash > 6L/Min, Double outlet eye wash > 10L/Min. Shower > 30L/Min |
| Note | Audible Alarm Device |
Emergency Showers
The emergency shower should deliver a pattern of water with a diameter of at least 50.8 cm (20 inches) at 152.4 cm (60 inches). This diameter ensures that the water will come into contact with the entire body - not just the top of the person's head. ANSI also recommends the shower head be between 208.3 and 243.8 cm (82-96 inches) from the floor. The minimum volume of spray should be 75.7 litres/minute (20 gallons/minute) for a minimum time of 15 minutes.
The shower should also be designed so that it can be activated in less than 1 second, and it remains operational without the operator's hand on the valve (or lever, handle, etc.). This valve should not be more than 173.3 cm (69 inches) in height. If enclosures are used, ensure that there is an unobstructed area of 86.4 cm (34 inches) in diameter.
Eyewash and Eye/Face Wash Stations
Eyewash stations should be designed to deliver fluid to both eyes simultaneously at a volume of not less than 1.5 litres/minute (0.4 gallons/minute) for 15 minutes. The combination eye and face wash stations require 11.4 litres per minute (3.0 gallons per minute). However, in either case, the volume should not be at a velocity which may injure the eyes. The unit should be between 83.8 and 134.6 cm (33 to 53 inches) from the floor, and a minimum of 15.3 cm (6 inches) from the wall or nearest obstruction.
Self-contained Eye/Face Washes
Install and maintain according to the manufacturer's instructions. Similar requirements apply as with the plumbed units regarding the unit's ability to provide flushing liquid for at least 15 minutes, accessible access, and to deliver tepid flushing fluid.
Personal Wash Stations
Designed to deliver flushing fluid immediately, personal wash stations can be used while transporting the person to the permanent eyewash station or medical facility. These stations do not replace the requirement to have a 15 minute-supply eyewash station. The expiry date of the fluid should be printed permanently on the unit.
Drench Hoses
Drench hoses may be used to "spot" rinse an area when a full shower is not required, to assist a person when the person is unable to stand or is unconscious, or to wash under a piece of clothing before the clothing is removed. The ANSI standard states that a drench hose may be considered an eyewash or eye/face wash if the drench hose meets the performance requirements as listed in the standard.
Know the location of safety equipment
▪ Locate your eye wash and emergency shower. An eye wash and emergency shower must be available within 10 seconds of unobstructed travel from where hazardous materials are used.
▪ Keep the path clear and unobstructed to your safety equipment.
Use only approved safety equipment
▪ Eye wash stations mounted on sinks are valid only if they have 2 orifices.
▪ Environment, Health & Safety (EH&S) discourages the use of a deluge hose as an eye wash. Deluge hoses are for cleaning glassware or other laboratory activities; they are not inspected by EH&S and may not be sanitary.
▪ Never rely on sink faucets to replace an eye wash or emergency shower.
Learn how to operate safety equipment
▪ Eye washes and emergency showers are easy to operate. Most equipment is designed for hands-free operation with either paddles, levers, or a pull-lever.
▪ To turn off, simply reverse the action required to turn it on.
▪ Ask your Area Safety Coordinator to show you how to use the equipment.
Maintain clearance around your safety equipment
▪ Keep the area clear at all times around your emergency shower and eye wash, including countertop-mounted eye washes.
▪ Be aware of electrical hazards. Keep energized electrical equipment away from eye washes and emergency showers.
Eye wash operation
Use the emergency eye wash immediately if your eyes are exposed to a hazardous chemical.
Keep eyes openThe first few seconds after exposure to a hazardous chemical (especially a corrosive chemical) are critical. Delaying treatment, even for a few seconds, may result in irreparable eye damage. Don't hesitate!
Note: Some outdoor eye washes may run discolored (rusty) water for a few seconds. Don't hesitate to use them immediately when needed
Are there any limitations I should be aware of?
Plumbed Emergency Showers and Eyewash Stations
Studies have shown that despite a general minimum of 15-minute flushing time being recommended, users usually flush exposed body parts five minutes or less. The reasons were always related to the extreme discomfort users experienced using cold water. In cold climates, the water temperature in indoor plumbed systems can be in the 2-7°C (35-45°F) range.
Be sure to maintain the equipment. ANSI suggests a weekly activation to help reduce sediment and/or stagnant water issues.
Portable, Self-Contained Eyewash Stations
Portable, self-contained eyewash stations have a limited amount of fluid. As a result, maintenance is critical to ensure that units are fully charged at all times.
These eyewash stations also require ongoing maintenance of the flushing solution. The agents used to control bacterial growth are effective for certain limited periods of time. Also, small amoebae capable of causing serious eye infections have been found in portable and stationary eyewash stations. Consequently it is important to monitor the shelf life of the solution and replace the solution when it has expired.
Eyewash Bottles
Eyewash bottles or personal eyewash units supplement plumbed and self-contained stations, but in no way can replace them. They are portable and permit immediate flushing of contaminants or small particles. However, eyewash bottles are very difficult for the user to handle, especially when alone and when both eyes have been exposed. (e.g., holding the eyelids open while handling the unit is awkward). Also, one bottle cannot flush both eyes simultaneously. Since the fluid supply lasts for only a short period of time, the bottle may not able to wash the eyes sufficiently.
The main purpose of such a unit is to supply immediate flushing. Once accomplished, the user should proceed to a self-contained or plumbed eyewash and flush for the required flushing/ rinsing period.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}